QuiqLiteX - RED-WHITE L.E.D.
Red/White L.E.D. configuration is designed for tactical light applications when your night vision needs to be kept intact and your position needs to be concealed. The white L.E.D. is used for normal reading and writing when the amount of light output is not a concern. QuiqLiteX is equipped with a 10 minute auto-off battery saving timer and continuous Safety Strobe.
1st push activates single Red L.E.D. (10 minute auto-off timer).
2nd push within 2 seconds of 1st push turns off the red LED and turns on the white L.E.D. (10 minute auto-off timer).
3rd push turns all L.E.D.s off.
If 2nd push is delayed past 2 seconds of 1st push, QuiqLiteX will auto shift into Tactical Mode turning off the Red LED without activating the White LED.
X SuperBright Mode:
1st push of X button located on the top of the product will increase brightness from 20 up to 75 lumens per L.E.D (white LED only).
2nd push will dim light back down to 20 lumens per L.E.D.
Press & hold main power button down for 2 seconds to activate Safety Strobe (no auto-off timer).
Press button again to turn off strobe.
Battery Run Time:
White L.E.D: 20 Lumens: Up to 11 hours
Red L.E.D: 20 Lumens: Up to 5 hours
Charge time is approximately 2 hours.
High Power (white L.E.D. only): Single LED 75 Lumens: Up to 4.5 hours
Strobe: Up to 4 hours continuous